We have been manufacturing wood moulding (also spelled molding in the US) in Xiamen since 2008. Our 200,000 m² production base is set up for container-scale orders, and our minimum order is one full container. That setup is a strength for the right buyer. It also means some requests simply don't belong with us, and we would rather say so before you spend weeks on emails and samples.
Here are the five situations where we would tell you to look elsewhere, and what we'd suggest instead.
| Your situation | Why it doesn't fit | What we'd suggest instead |
|---|---|---|
| You need less than one container | Our minimum order is one full container (20ft or 40ft) | Local distributor stock |
| You want flawless finger-jointed moulding under clear or stained finish | Finger joints stay visible under transparent finishes, whatever the supplier | Select-grade solid wood or veneered moulding (we can supply both at container volume) |
| Your moulding will be used outdoors | MDF and finger-jointed products are not outdoor materials | Tropical hardwood or aluminium profiles |
| Your deadline is under 21 days | Production plus ocean freight takes 21–30 days at the fastest | Local warehouse stock |
| You need one or two sample lengths per profile | Our production process isn't built for single-piece runs | Local retail stock for a hands-on look; ask us about sample support for serious evaluations |
Do you need less than one container of moulding?
If your requirement is smaller than a full container, we are not the right supplier. Our minimum order is one 20ft or 40ft container, and quantities below that make the cost per metre uncompetitive for you.
We built our process for container-scale production: raw timber processing, finger-jointing, veneering, coating, CNC machining and packing all run in-house on one site. That keeps delivery and quality consistent, but it also means we can't economically run a few boxes of a single profile through the same line.
What we do offer is variety within the container. One container can be mixed with 20–60 SKUs, so a distributor stocking a wide range doesn't have to buy a full container of one profile. The total volume still has to reach container level, though.
If you are topping up a few profiles for a single job, or restocking a handful of pieces, a local distributor with stock on the shelf will serve you better and faster than we can.
Do you need flawless finger-jointed moulding under a clear or stained finish?
Finger joints will show under a transparent or semi-transparent finish, however precisely they are made. This is a structural limit of the process, not a workmanship issue, and every supplier's finger-jointed moulding has it.
I would rather you hear this from us than discover it after installation. Finger-jointed moulding is made from short timber sections glued end to end. Even at our tighter premium-grade joint gap of under 0.3 mm (under 0.5 mm for standard grade), the joint remains visible under a clear coat. Adjacent sections can also differ slightly in colour, and the difference sometimes shows in raking light. Species matters too: oak finger joints stand out particularly under a clear finish, so we treat oak as a species to finger-joint with caution.
Finger-jointed moulding is a paint-grade product. For primed or painted work it is a sound, stable choice. For stain-grade work, look at these instead:
| If you need | Consider | Honest limitation |
|---|---|---|
| Clear or stained finish, solid wood character | Select-grade solid wood moulding | Even top-grade J2 stock can contain small live knots (up to 3 mm); solid wood also costs 30–80% more than MDF for equivalent paint-grade profiles |
| Consistent clear-finish look at lower cost | Veneered moulding | Natural veneer grain and tone vary from tree to tree, so confirm enough same-batch stock before ordering a large space |
We can supply either alternative at container volume. If your job needs a flawless finger-jointed profile under clear lacquer, though, no supplier can deliver it, including us. For a side-by-side view of all four materials, see our guide to choosing between solid wood, finger-jointed, MDF and veneered moulding.

Will your moulding be used outdoors?
MDF moulding is for dry interior use only, and our finger-jointed products are not designed for exterior use either. If your project is outdoors, you need a different material.
Even moisture-resistant (MR grade) MDF moulding suffers irreversible internal damage under rain or sustained humidity above 85% RH. Our own edge-swelling figures show why. After 24 hours of immersion, unsealed standard MDF edges swell by 10–25%, MR-grade by 5–12%, and MR-grade with double-sided sealing by under 3%. That last figure is a good result for interior conditions, but it is not an outdoor rating.
The same logic applies to our practice for Australian orders. Our rule is that every MDF order for Australia gets sealed end faces before shipment, to reduce moisture uptake during storage and shipping. That is an internal rule we adopted after a hard lesson, not an industry standard, and it protects dry-use products. It doesn't turn MDF into an exterior material.
For genuine outdoor applications, look at tropical hardwood or aluminium profiles. Rooms with permanent wet exposure are in the same category as outdoors for MDF.
Is your deadline shorter than 21 days?
Production plus ocean freight takes 21–30 days at the fastest, so a delivery deadline inside 21 days is not realistic for us. If your schedule is that tight, buy from local stock.
Sea transit alone takes a large share of that time. Typical voyages from Xiamen run about 12–15 days to Los Angeles and about 18–22 days to Sydney, before customs clearance and inland delivery. As with any China-based factory, lead times can also stretch around peak season and the Chinese New Year period1.
I'd add one clarification. We can develop samples of discontinued profiles in 3–7 days, and we have reproduced over 300 discontinued profiles. That figure refers to sample development, not to delivering a container. A fast sample doesn't shorten the production-and-shipping timeline for the order that follows.
If you can plan ahead, our fixed timeline becomes an advantage: our full in-house process makes delivery dates more predictable. For urgent jobs, a local warehouse is the right call.
Do you only need one or two sample lengths per profile?
We are not the right fit for one-off trial orders of one or two lengths per profile. Our production process is built for production runs, and it isn't practical to start the full line for a single piece.
If you're evaluating us seriously for container-scale business, that is a different conversation. We provide sample bars and sample support to help customers with market development and channel building. Tell us about your project and we will say what is possible, rather than you placing a "trial order" that neither of us can run economically.
If you only want to see and feel a profile before deciding, a local distributor's retail stock is the quickest and cheapest way. Our 3–7 day turnaround for discontinued profiles is a separate service for replicating a profile you send us, not a general sampling programme.

So when are we the right fit?
We work best with buyers whose needs look like this:
- Container-scale volume, including mixed containers of 20–60 SKUs, for importers and distributors
- Door and window manufacturers who need CNC-machined, made-to-drawing semi-finished components
- Private-label brands and long-term replenishment programmes through OEM/ODM development
- Project buyers who need staged deliveries matched to the construction schedule
- Buyers who need export documents (CO, PL, CI) and the credentials behind our FSC2, CARB3, EPA4, CE, ISO 90015 and E0/E1 certifications
If that sounds like you, we would like to hear about your project. If it sounds like one of the five situations above, we hope this saved you time.
Frequently asked questions
Can I order less than a full container from Goodwood Mouldings?
No. Our minimum order is one full container, either 20ft or 40ft. If you need fewer pieces than that, local distributor stock will be faster and cheaper for you. Within a container, you can mix 20–60 SKUs.
Can finger-jointed moulding be used with a clear or stained finish?
It can be, but the joints will be visible. Finger joints show under transparent finishes at any precision level, so finger-jointed moulding is a paint-grade product. For a clear finish, choose select-grade solid wood or veneered moulding instead.
Is moisture-resistant MDF suitable for outdoor use?
No. MDF moulding is for dry interior areas only. Even MR-grade MDF can be permanently damaged by rain or sustained humidity above 85% RH. For exterior work, choose tropical hardwood or aluminium profiles.
How quickly can a container order reach me?
Production plus ocean freight takes 21–30 days at the fastest. Sea transit alone is about 12–15 days to Los Angeles and 18–22 days to Sydney, before customs and inland delivery. If you need material in under 21 days, buy from local stock.
Can I order one or two sample lengths of a profile?
Not as a trial order, because our production process isn't set up for single-piece runs. We offer sample bars and sample support for buyers evaluating us for container-scale business. If you only want to see a profile, local retail stock is the quickest route.
Not sure which side of the line your project falls on?
If you matched one of the five situations above, this may not be the best fit — and we would rather tell you now. Use the alternatives in the table, and come back when your volume or timeline changes.
If your need is container-scale, tell us your volume, target market and timeline, and we will say plainly whether we can serve it:
- Importers and distributors: Plan your mixed-SKU container
- Door and window manufacturers: Ask about door and window component specs
- Private-label brands: Start a private-label development conversation
- Project buyers: Confirm staged-delivery options for your project
- A discontinued profile to replace: Send us your discontinued profile drawing or sample (sample development in 3–7 days)
Related reading: Mixing 60 SKUs in One Container: How We Control Shipping Damage Risk · Solid Wood, Finger-Jointed, MDF or Veneered: How to Choose the Right Moulding · More answers in our FAQ
Find out how Chinese New Year shutdowns ripple through factory output and shipping schedules. ↩
Read how FSC chain of custody certification tracks certified wood through the supply chain. ↩
See how California's composite wood formaldehyde rules apply to products sold in the state. ↩
Learn how the federal TSCA Title VI formaldehyde standards for composite wood work. ↩
Discover what ISO 9001 asks of a quality management system. ↩